
The Oxygen Panel is one of the easiest to build so I'm using this panel as a template for how others will be documented. Also I'm learning new bits of FreeCAD 1.1.3 such as assembly, exploded views and technical drawing workbenches
Even though this is a very simple on/off toggle switch panel you can see that it's still quite a lot of work. I made this panel in a few days but some of the more complex panels take a couple of months to make if like me you're doing this in the evenings

There is no light source to this panel so it can be made of any 3 mm and 1 mm white acrylic.
1. Laser cut the bottom layer in a laser cutter using 3 mm acrylic sheet.
2. Laser cut the middle layer in a laser cutter using white 3 mm acrylic sheet.
3. Laser cut the top layer in a laser cutter using white 1 mm acrylic sheet.
4. Paint the bottom and middle layers grey.
5. Paint the top layer black.
6. Engrave the two vertical marks through the paint on the middle layer.
7. Engrave the text through the paint on the top layer.
8. 3D Print 4 DZUS caps and 4 DZUS grommets.
9. Paint DZUS Caps grey.
10. Attach the switch to the bottom layer with the slot towards the bottom of the panel.
12. Place the bottom and top layers together and secure with 4 M3x40 mm screws through the DZUS grommits.
13. Add the two M4 screws through middle and bottom layers.
14. Place the top layer and secure with 4 M2x10 mm screws.
15. Press DZUS caps over the DZUS grommets.
15. Connect the cable to each side of the switch.
Note all .SVG files are 96dpi.
| Part | Description | File | Type |
| A | DZUS Cap | DZUSCap.stl | 3D print |
| B | DZUS Grommets | DZUSGrommet.stl | 3D print |
| 1 | Bottom Layer | OxygenPanel_BottomLayer.svg | Laser cut |
| 2 | Middle Layer | OxygenPanel_MiddleLayer.svg | Laser cut and engraved |
| 3 | Top Layer | OxygenPanel_TopLayer.svg | Laser cut and engraved |
| 4 | M3x40mm screws (x4) | ||
| 5 | M2x10mm screws (x4) | ||
| 6 | M4x10mm screws (x2) | ||
| 7 | Switch toggle ON/OFF ST-SP | ||
| 8 | M2 nuts (x4) | ||
| 9 | M3 nuts (x6) | ||
| 10 | M3 washers (x6) | ||
| 11 | M2 washers (x4) |